Tools for Bridge Height Measurement
Tailored for Oversized Load Vehicles (Escort vehicles, trailers, trucks) – Look no further: 1000 Measurements/sec, Automatic Bridge Detection, Minimum & Maximum Heights, Shape Graph, Measurement History, GPS*… All with centimeter-level accuracy.
10 Meters
Auto Detection
Alarm
GPS*
Chart
15 Settings
1000 Measures/s
±1% Margin
*Optionnal.
Avoid collisions for your Convoys
Avoid collisions for your Convoys
To prevent it, it is essential to know the minimum height of bridges along the itinerary.
Forget about Old methods
Forget about Old methods
Manual methods using rangefinders or telescopic poles are outdated, impractical, and even hazardous (Exiting the vehicle, hasty roadside measurements, traffic disturbance, uncertainties about the lowest point, etc…).
With our device, you can measure efficiently and safely from within your vehicle.
Unlock new Paths
Unlock new Paths
Optimizing your routes not only saves time and fuel but also boosts operational efficiency, positioning you ahead of competitors in the industry.
Introducing New & Modern Tool
The MHP-VP1 is the perfect device for bridge measurement. It meets all the requirements of Oversized Load transporters:
- Quick Installation and Calibration* (<5min)
- Precise Measurements at High Speeds (130km/h – 80Mph**)
- Convoy Height Adjustment and Anti-Crash Alarm
- Heights Minimums of Bridges and the Full Route
- Inspect Bridge’s shape in a Live Graph
- Works Perfectly in Adverse Weather Conditions
- Very Competitive Price.
* No need to recalibrate the sensor afterward.
** Measure at moderate speeds for increased accuracy.
Discover the ideal Device
Ultra Fast
Measure without slowing down at 130 km/h.
Real-Time Graph
Visualize the bridge shape in real-time.
Automatic Detection
Automatic measurement and stop as soon as the bridge is crossed.
Anti-Crash Alarm
Set an alarm that will warn you if the measurement goes below a threshold.
Fully Adjustable
Display speed, measurement range, calibration, Threshold Adjustment, etc...
Portable & Durable
A single charge for measuring hundreds of bridges, anywhere.
Functionalities
- Automatic detection of the beginning and end of the bridge.
- Real-time measurement with graphical curve of the bridge shape.
- Display of minimum bridge heights and full route.
- History of the last three minimum measurements.
- Turbo mode with a measurement frequency of 1000 Hz.
- Precise measurements at high speeds (130 km/h), night-time, and in adverse weather conditions.
- Manual adjustment of measurement range.
- Adjustable anti-collision alarm based on convoy height.
- Quick calibration of ground-sensor distance, easily modifiable.
- Sky detection (OUT) and management of various errors (ERR).
- Pause button to suspend or stop measurements.
- Reset button to clear data and graph.
- Menu with 15 configurable parameters (see documentation).
TECHNICAL INFORMATION
Capteur :
- Dimensions: 107x62x45mm + Câble 3m
- Poids: 214 Grammes (avec câble 3m)
- Distance de mesure: 0.03m – 10m
- Précision: ±5cm si < 6m sinon ±1% (±1cm en pratique)
- Fréquence des points de mesure: 200Hz. Mode Turbo: 500Hz, 1000Hz
- Réglage manuel de l’inclinaison (à orienter grâce à l'écran de calibration)
Appareil :
- Dimensions: 75x64x55mm
- Poids: 275 Grammes
- Écran: IPS Tactile 3.5’’ 480x320
- Batterie: 2x 18650 2500mAh
- Temps de fonctionnement: ~8h = environ 500 ponts de 1min
- 2x Entrées: USB-C, Micro-USB
- Sortie: Port USB-A (PowerBank ou GPS)
- Fixation sur support aimanté possible
Accessoires :
- Boîte de rangement renforcée
- 1x Chargeur Voiture ultra compact - QC3.0, 2 Sorties: USB-C + USB-A
- 1x Chargeur Secteur 30W QC3.0, 2 Sorties: USB-C + USB-A
- 1x Câble USB-C à USB-C de 2m
DESCRIPTION
Our bridge height measurement tool is an essential device for accurately and instantly measuring bridge heights with centimeter precision. It also serves as an anti-collision sensor for exceptional convoys.
The kit includes a magnetic sensor to be mounted on the vehicle roof (pilot car or tractor), connected to the measuring device by a 3m or 5m cable.
The device displays measurements and useful information such as Max and Min values, the graphical shape of the bridge, the indicator for minimum threshold reached, measurement history, and more.
The sensor can measure bridge heights up to 10m, up to a thousand times per second, with a maximum variation of ±1%. Certified IP65, it is resistant and can operate normally in adverse weather conditions such as rain, fog, and sandstorms.
Our device features a battery for portable use and can also be operated continuously with a 5V power supply.
Finally, our devices are fully developed in France.
Video Demonstration
Watch our device in action and see the shapes of multiple bridges in a condensed video!
Bridge measurements at +90 Km/h (55mph) (New Model)
Presentation video (Previous Model⚠️)
